Siemens MCP 398C Operation/Programming

9
08/2005 Program Management
9.2 Mana
g
in
g
p
ro
g
rams with Sho
p
Turn on NCU
(
HMI Embedded
)
9
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition 9-377
-or-
 Press the "Input" or "Cursor right" key.
All the programs in this directory are displayed.
Returning to the next
highest directory level
 Press the "Cursor left" key with the cursor in any line.
-or-
 Place the cursor on the Return line.
-and-
-or-
 Press the "Input" or "Cursor left" key.
The next highest directory level is displayed.
9.2.1 Opening a program
To view a program in more detail or modify it, you must display the
machining plan for the program.
 Press the "Program" softkey.
The directory overview is displayed.
 Place the cursor on the program that you want to open.
-or-
 Press the "Input" or "Cursor right" key.
The selected program is opened in the "Program" operating area. The
machining plan of the program is displayed.

Siemens MCP 398C Specifications

General

Brand	Siemens
Model	MCP 398C
Category	Control Systems
Language	English