2
08/2005 Setting Up the Machine
2.5 Tools
2
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition 2-63
Coolant supply 1 and 2 (e.g. internal and external cooling) ON/OFF
Coolant ON
Coolant OFF
The coolant supply on the machine does not necessarily have to be
set-up.
Please also refer to the machine manufacturer's instructions.
îš¾ Enter the desired tool name and the values for the tool offset data
in the tool list.
-or-
îš¾ Press the "Alternat." softkey or the "Select" key to carry out the
desired settings for the tool-specific functions.
To Next Page
Loading...
Need help?
General
