Siemens MCP 398C Operation/Programming

2
08/2005 Setting Up the Machine
2.8 Manual mode
2
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition 2-85
Back to
manual
-and-
 Press the "Back to manual" softkey.
The work offset will be active the next time you press the "Cycle Start"
key.
Setting the unit of
measurement
Jog
 Select the "T, S, M" softkey in "Machine Manual" mode.
 Select the unit of measure.
The unit of measurement will be active in manual mode the next time
you press the "Cycle Start" key.

Siemens MCP 398C Specifications

General

Brand	Siemens
Model	MCP 398C
Category	Control Systems
Language	English