Siemens MD-BMS - Real-Time Values

Installation
Verifying Installation with ViewPoint Softwa
re
59
Building Technologies 125-202
06/06/2017
Real-Time Values
Figure 13: Real Time Values Screen.
The Real-Time Values screen shows current readings to verify that the system is
configured properly. The tables display the real-time values of Volts, Amps, KW, KVA,
KVAR, apparent power factor (aPF), and displacement power factor (dPF) for Phase
L1, Phase L2 and Phase L3. This screen also displays the current Data/Digital Scalar
value used for each element, the CT Type connected to the MD-BMS or MD-BMED
Power Meter, and the CT Value.
Do one of the following:
● Click Update to retrieve the values from the MD Model Power Meter.
● Select the Auto-Update check box to automatically update approximately every 20
seconds.