Introduction
9
Building Technologies 125-202
06/06/2017
Meter Anatomy
Safety Summary and Specifications
This general safety information must be used by both the Logger operator and
servicing personnel. Siemens Industry, Inc. assumes no liability for user’s failure to
comply with these safety guidelines.
The MD-BMS and MD-BMED Power Meters are Over-Voltage Category III devices.
Use approved rubber gloves with mechanical protection and goggles when operating
these devices.
Conforms to UL Std 61010-1
and IEC61010-2-030
Certified to CSA Std C22.2 No. 61010-1
Symbols on Equipment
WARNING
This meter may contain life threatening voltages.
Qualified personnel must disconnect all high voltage wiring before using or servicing
the meter.
To Next Page
Loading...
