Siemens MD-BMS - Read;Write Registers

To Next Page

To Previous Page

Installation

Verifying Installation with ViewPoint Software

Building Technologies 125-202

06/06/2017

Read/Write Registers – Read/Set Objects

The Read/Write Registers, Read/Set Objects screen provides diagnostic and special

configuration options, allowing the changing or viewing of the value of any MD-BMS or

MD-BMED register or object. The tab name changes depending on which protocol

(Modbus or BACnet) you are using; its use is not required for a basic setup.

● Do one of the following:

– Enter a register/object address. See

Appendix A

and

Appendix B

for a list of

registers/objects and their descriptions..

– Click List to select a register/object from the Register/Object Picker dialog box.

Siemens MD-BMS - Read;Write Registers - Read;Set Objects