EasyManua.ls Logo

Siemens MOBILETT XP Digital - Page 38

Siemens MOBILETT XP Digital
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38 Error messages of the imaging system
MOBILETT XP Digital SPR8-230.840.30.03.02 Siemens AG
12.05 CS SD 24
Page 38 of 68
Medical Solutions
-513 Media Control Error: Operation
has been canceled because the
external storage or directory is
busy.
Touch OK and try again after a
while.
-514 External Storage Error: Exposed
images cannot be stored
because capacity of folder parti-
tion is smaller than size of
exposed images. Use a new
disk, erase the folder contents,
or increase the folder size and
retry.
Touch OK and set the Max Size of
Disk.
-517 Internal Storage Error: Pro-
cessed image cannot be stored
because capacity of internal
storage memory is insufficient.
Touch OK and shut down the sys-
tem .
If these errors occur, contact a Sie-
mens representative or distributor.
-518 Internal Storage Error: DICOM
image cannot be stored because
capacity of internal storage
memory is insufficient.
-519 External Storage Error: Capac-
ity of external storage memory is
insufficient. Retry after making
space on the disk.
Touch OK. Replace the external
disk and try again.
-520 Internal Storage Error: Exposed
image cannot be stored because
capacity of internal storage
memory is insufficient.
Touch OK and shut down the sys-
tem.
If these errors occur, contact a Sie-
mens representative or distributor.
-521 Queue File Open Error: Queue
file not found.
-599 File Open Error: File not found.
-601 Resend Error: File may have
been automatically deleted.
Touch OK.
-5100 Detector Unit: Detect Error:
Check the detector power unit or
cable connection. If system
recovery is desired, shut down
system.
Touch OK and shut down the sys-
tem.
Check cable connections.
If the cause cannot be found, con-
tact a Siemens representative or
distributor.
-5101 Detector Unit: Detect Error:
Check the detector power unit or
cable connection. If system
recovery is desired, shut down
system.
Error Code Error Message Remedy

Other manuals for Siemens MOBILETT XP Digital

Related product manuals