34 General maintenance information
MOBILETT XP Digital SPR8-230.831.30.03.02 Siemens AG
11.05 CS SD 24
Page 34 of 74
Medical Solutions
5.1 Function of the emergency-stop
switch
n.a.
5.2 Are the warning devices functioning
properly?
3.3.3 Check of the radiation indicator,
checks:
SIE Radiation indicator
SIE Ready indicator
SIE Acoustic signal
5.3. Do all system movements stop prop-
erly in their end positions?
n.a.
5.4 Does the collision protection device
stop all system movements properly (e.g.
collision protection)?
n.a.
5.5. Are all safety distances (wall, floor,
ceiling) met or ensured by other appropri-
ate measures (such as light barriers)?
n.a.
5.6. Are the other safety shutdown
devices functioning properly (e.g. safety
floor plate)?
n.a.
5.7 Are the positions of the table and sys-
tem reproducible (e.g. zero positions,
layer height, etc.)?
n.a.
Test report/
Technical safety checks
Maintenance instructions for the
check/comments
To Next Page
Loading...
