3.9.2 Changing the display language
Display languages which can be set:
English Français Italiano
Nederlands Espanol Português
Pyccкий English
Sprache / Deutsch (Language / German) has been set at the
factory.
To set another language, select the required language with button (e)
or (f) and save with the Standby (a) button.
3.9.3 Changing the water hardness
Determine the water hardness with the enclosed test strip or ask your
local water supplier.
Hardness setting 3 has been preselected.
The following settings are available:
Setting 1 Setting 2 Setting 3
Setting 4 Setting – -
Setting – – means that no water hardness has been set. The
appliance no longer automatically signals when it requires descaling.
To change the water hardness setting, press button (h) 1x in
programming mode. To change the water hardness, select the
required setting with button (e) or (f) and save with the Standby (a)
button.
Inputting the water hardness is important for the descaling
programme. If using external water softening systems or filtered water,
select water hardness setting – –.
3.9.3.1 Degree of water hardness
Setting German French
– –
None None
1 1–7 1–13
2 8–15 14–27
3 16–23 28–42
4 24–30 43–54
58300000116013_en_a – 21.08.06 Seite 15 von 61
To Next Page
Loading...
