3.2 Window with opening sensor
Risk of damage!
Do not obstruct or remove the window!
Clean the window with a damp cloth. Do not use any
scouring agents.
► Set mains switch to I. The blue illuminated ring around the
Standby button lights up. The window (2) opens and closes
independently.
► Press the “Standby” button, the window (2) opens. The
appliance conducts a self-test and starts the heating-up
phase.
The window automatically closes approx. 2 min. after the last activity.
The appliance features a movement sensor. To open the window (2),
move hand in front of the window.
58300000116013_en_a – 21.08.06 Seite 6 von 61
To Next Page
Loading...
