7.2 Service mode
7.2.2 Displays in service mode
Press the steam button (h) to select the next display. Number of
brews and settings are indicated by changing text:
To access the service mode, switch off the appliance with the mains
switch or by pulling out the mains plug.
Tot. Brew 84
Brew counter
7.2.1 Selecting service mode:
Tot. Litre 6
Amount of water
Small 49
Number of small cups
Large 35
Number of large cups
Tot. Water 5
► Carefully push on the door
(2) by hand.
Number of hot water brews
Tot. Steam 12
Number of steam brews
► Press and hold down Steam
button (h).
Coffee [L] 5
Coffee brews total litres
► Insert mains plug or switch
on mains switch.
Water [L] 1
Hot water total litres
► Hold down Steam button (h)
for another 3 seconds.
Steam [L] 1
Steam production total litres
Desc.count 2
Display Tot. Brew is displayed alternately with the number of brews.
Descaling count
Press the steam button (h) to select the next display.
Reset 1
Number of manual resets
To end the service mode, press and hold down the Steam button (h)
for approx. 3 seconds. The display goes out, the brewing unit is
initialised, the appliance switches to standby mode and the blue
illuminated ring around the Standby button (a) is lit.
Temp. Standard
Set brewing temperature
+2 °C +4 °C +6 °C
Increase temperature button (f)
-2 °C -4 °C -6 °C
Reduce temperature button (g)
58300000116013_en_a – 21.08.06 Seite 54 von 61
To Next Page
Loading...
