6.12 Replacing capsule cage
Tools:
► Capsule cage wrench (mat. no.: 34 1098)
► Silicone grease: Paraliq GTE703 (mat. no.: 31 0574)
Procedure:
1.
Pull coffee outlet (1) forwards out of the appliance.Pull capsule
holder (2) forwards by the lower edge, press down and pull out of
the appliance (3).
2.
Pull drip tray and capsule container out of the appliance.
3.
Switch on the appliance and start coffee brewing process by
pressing a “coffee” button.
4.
Switch off the appliance with the mains switch before the pump
starts running.
Using the installation tool (E), unscrew the capsule cage (D)
anti-clockwise out of the cage holder.
Replace nozzle body (F), replace capsule cage (D).Sparingly
lubricate nozzle body (F) and sealing ring (G) with food-safe
silicone grease Paraliq GTE 703.
6.
During re-assembly, sparingly lubricate the slide rails for
the coffee outlet with food-safe special grease
PARALIQ® GTE 703.
Assemble in reverse sequence.
7.
5.
58300000116013_en_a – 21.08.06 Seite 51 von 61
To Next Page
Loading...
