3.10.2 Cleaning the CAPPUCCINO / CAFFELATTE nozzle
The nozzle and valve must be cleaned immediately to ensure
optimum milk froth. Even the slightest milk residue will impair
the frothing up result!
► After each frothing up process, switch to Draw hot water and
flush the frothing up nozzle with hot water.
► Clean daily by placing the hose in a glass/receptacle
containing hot water and repeat the (frothing up) process –
except now with drawn in water. Milk residue is dissolved and
flushed out.
► To clean thoroughly, disassemble all parts and clean with a
soft brush in a mild detergent solution.
Clean particularly inaccessible locations with a blunt needle.
Rinse all parts with hot water and dry.
Parts are dishwasher-proof.
Attention: When re-assembling the parts, ensure that the smooth
end of the milk hose is connected to the frothing-up aid.
Insert the notched end (A) into the milk container.
Connect all parts firmly together. Ensure that there
are no gaps between the individual parts.
58300000116013_en_a – 21.08.06 Seite 18 von 61
To Next Page
Loading...
