20/72
Building Technologies User Manual OCI600 74 319 0002 0 c
HVAC Products Operating elements of the central communication unit 15.07.2005
2.3.2 Operating card 2 = Diagnostics
2.3.2.1 General displays
Operating card 2 of the OCI600 only contains diagnostic val-
ues. You cannot change any of them.
SW Version
Here, you can view the software version of the OCI600 cen-
tral communication unit.
LPB Communication Version
Here, you can see the LPB version supported by the com-
munication interface.
Serial Number
Before leaving the factory, each central communication unit
is given an unambiguous production number. This number is
useful in connection with service work.
Configuration Version OCI600
Here, you can see the configuration version supported in
connection with Minitel applications.
Status Modem Communication
Here, you are given the state of modem communication. For
details, refer to the subsection below.
2.3.2.2 Modem displays
When selecting line number 60 on operating card 2, the state
of modem communication can be monitored.
FILE
2529Z21
Status display “60“ is maintained and does not automatically
switch to the standard display (time of day).
Note
To Next Page