46/72
Building Technologies User Manual OCI600 74 319 0002 0 c
HVAC Products Setting up the OCI600 with the ACS7.. software 15.07.2005
For the logical inputs parameterized as alarms, select the
phone number to which the alarm message shall be sent.
Alarm messages can be delivered to 4 different phone num-
bers in different combinations.
Each logical input can be assigned to 1 of the 2 “Outputs
OCI600“.
4.3 Notes on saving and loading a
configuration
On the Popcard, it is not necessary to specifically load the
edited settings. When connected, the changed values are
directly written to the OCI600 where they are saved.
Using Application > Parameter settings…, it is possible to
save and load the configurations of the OCI600 (and of all
other devices that can be reached via LPB).
Applications:
• In case the OCI600 shall be reset to the default condi-
tions (e.g. communication password forgotten), a
backup is required
• The current parameter settings shall be used for a simi-
lar plant, or the same plant
• Some other parameter settings shall be tested without
having to overwrite the former settings
A detailed description of the Application > Parameter set-
tings… function is given in Online Help of your ACS soft-
ware.
Data point:
“Input n call“
Data point:
“Input n relay“
Backup
To Next Page
Loading...
