Siemens OpenStage 20 G User Guide

Important information
3
Location of the telephone
• The telephone should be operated in a controlled environment with an
ambient temperature between 5°C and 40°C.
• To ensure good speakerphone quality (only OpenStage 20/20 G) , the
area in front of the microphone (front right) should be kept clear. The
optimum speakerphone distance is 50 cm.
• Do not install the telephone in a room where large quantities of dust
accumulate; this can considerably reduce the service life of the tele-
phone.
• Do not expose the telephone to direct sunlight or any other source of
heat, as this is liable to damage the electronic components and the
plastic casing.
• Do not operate the telephone in damp environments, such as bath-
rooms.
Software update
Product support on the Internet
Information and support for our products can be found on the Internet:
http://www.siemens-enterprise.com/
.
Technical notes, current information about firmware updates, frequently
asked questions and lots more can be found on the Internet at:
http://wiki.siemens-enterprise.com/
.
During a software update, the phone must not be disconnected
from the power supply unit, the LAN line or the phone line.
An update action is indicated by messages on the display and/or by
flashing LEDs.

Siemens OpenStage 20 G Specifications

General

Brand	Siemens
Model	OpenStage 20 G
Category	IP Phone
Language	English