Step by Step
Privacy/security
66
Monitoring a room
You can use a phone to monitor a room. This function
must be enabled on the monitoring phone.
When you call this phone, you can immediately hear
what is happening in that room.
Activating the telephone to be monitored
N Press the key shown.
Select and confirm the option shown.
You can either leave the telephone in speakerphone
mode (OpenStage 20/20 G only) or lift the handset and
leave it directed towards the noise source.
Deactivating the telephone to be monitored
N Press the lit key. The LED goes out.
or
\ Replace the handset.
Monitoring the room
j Enter the internal station number of the phone located
in the room that you wish to monitor.
Trace call: identifying anonymous callers
(not for U.S.)
You can identify malicious external callers. You can
record the caller’s phone number during a call or up to
30 seconds after a call. In this case, you should not hang
up.
N Press the key shown.
Select and confirm the option shown.
*88=Room monitor?
*84=Trace call?
If the trace is successful, the transmitted data is
stored by your network operator. Contact your
service personnel.
To Next Page
Loading...
Need help?
General