Using team functions
85
Step by Step
Using team functions
If configured (consult your service personnel), your tele-
phone is part of a team. The team consists of internal
phones that are able to use certain functions.
Activating/deactivating a group call
If configured (consult your service personnel), you be-
long to one or more groups of stations, which can be
reached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt
group) or simultaneously (= group call) on all phones in
the group, until a group member answers the call.
Each station in the group can still be reached via their
personal station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group.
You are part of a hunt group or call group
$ Open the idle menu Æ page 18.
Select and confirm the option shown
[1]
,
or
select and confirm the option shown.
You belong to multiple groups
$ Open the idle menu Æ page 18.
Select and confirm the option shown
[1]
,
or
select and confirm the option shown.
If an "X" appears between group/trunk number (such as
301) and group name, the audible tone is active for this
group or trunk.
Special features must be taken into consideration
if your telephone operates with HiPath 5000 (sys-
tem networking via PC network) Æ page 90!
Leave group?
[1] "Differing display view in a HiPath 4000 environment" Æ page 100
Join group?
Leave group?
Join group?
301 X Group name
To Next Page
Loading...
Need help?
General