Step by Step
Basic functions
32
Call forwarding
Using variable call forwarding
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
r Press the key shown.
or
$ Open the idle menu Æ page 18.
Select and confirm the option shown.
Confirm
or
select and confirm the option shown
or
select and confirm the option shown.
j Enter the destination number.
Confirm.
Deactivating call forwarding
r Press the key shown.
or
Select and confirm the option shown.
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
The call forwarding key flashes if you are a call
forwarding destination Æ page 15.
Special features must be taken into consideration
if your telephone operates with HiPath 5000 (sys-
tem networking via PC network) Æ page 91!
Forwarding on?
1=all calls?
2=external calls only?
3=internal calls only?
Save?
Forwarding off
To Next Page
Loading...
Need help?
General