Siemens Optipoint 420 - How to Use this User Guide; Display

Step by Step
Basic Usage Instructions
10
How to use this user guide
The operating procedures are presented in a logical
sequence in the colored column. The symbols used
have the following meanings:
n Lift the handset.
t Replace the handset.
o Enter number or code.
u or v Press the setting keys on the telephone.
Press the key.
Press the key that is lit.
Press the key that is flashing.
: The selection option is shown on the display as an inver-
ted line (light characters on dark background).
Confirm with key
:.
> : Look for the selection option.
Press keys
< > until the selection option appears on
the display, as an inverted line.
Then confirm with key
:.
Display
Line 1 contains instructions or acknowledgment mes-
sages, depending on the particular situation.
Line 2, 3, and 4 contains selection options for functions,
which you can acknowledge with
: Several available
options are displayed in a list (max. three entries at one
time), which you can leaf through with
< >.
program/service
Speaker
Executive
Consultation?
Ringer pitch?
Only the option to be selected is normally display-
ed in this documentation, however without inver-
ted representation (see below).
Please dial:
Last number redial?
Saved number redial?
Unanswered calls?