Making multiline calls
105
Step by Step
Call switching
If you intend to leave your workplace for a while or if you
don't want to be disturbed, you can activate call switch-
ing to divert incoming calls on this line to a destination
telephone. A call switching key can be configured for
every line.
Switching on:
Press the key. The lamp on your telephone and the lamp
on the destination telephone will light up. If a call
comes, the line key will flash but there is no sound. The
call is signaled to all other team telephones.
Switching off:
Press the key. The lamp goes out. Incoming calls will be
signaled on the telephone again in the normal way.
Direct call keys
Precondition: One or more direct call keys for network-
wide direct calls to line partners have been configured
on your telephone. With a direct call key you can be con-
nected to a line partner directly.
Understanding the lamp signals on direct call
keys
Lamp is dark – line partner is not telephoning.
or Lamp is lit – line partner is telephoning.
or Lamp is flashing – line partner is being called but has
not yet answered the call.
Intercept 1
Intercept 1
Jones
Jones
Jones
To Next Page
Loading...
