Step by Step
Making multiline calls
106
Calling a line partner
Look at the lamp signals on the direct call key!
Lamp is dark – line partner is not telephoning:
Press the direct call key, e.g. "Jones"
n Lift the handset.
or With the handset on-hook: handsfree speaking and
open listening (with optiPoint 420 standard only).
Lamp is lit – line partner is telephoning:
Press the direct call key.
Yo u r line partner hears you knocking. The direct call
key on his telephone starts flashing.
n When your line partner answers: lift the handset.
or With the handset on-hook: handsfree conversing.
A line partner calls you
The lamp flashes. In addition, the name of the line part-
ner who wants to speak to you is shown in the display.
n Lift the handset.
or
Press the flashing key, e.g. "Jones", and converse
handsfree.
Jones
Jones
Jones
Jones
To Next Page
Loading...
