Saving Functions and Appointments
73
Step by Step
Example 3
As the number of characters for a short dial entry is lim-
ited to 22, you can link two short dial numbers for a
longer sequence. You can, for instance, program the
server access and a code number on one short dial key,
and then refer to a second short dial which contains for
example, an LCR access code and the destination call
number.
For example, you can program the following sequence
on the short dial number 1:
*3(PIN access code) + 12345678901 (PIN) + *55 (short
dial code) + 5 (the number of the next short dial that you
wish to use).
The program for entry of the short dial 5
9 (LCR access code) + 156192317 (destination call num-
ber).
If you invoke the short dial 1 now, first its entry, and then
the entry for short dial 5 is automatically processed.
Programming short dial
Press the key. The lamp lights up.
: Confirm.
> : Select and confirm.
> : Select and confirm (used in US).
p Enter a specific speed dialing number (0 to 9 or 00 to 19
or 00 to 29).
If this digit has already been assigned a telephone num-
ber, this number is shown on the display.
: Confirm.
p Enter the number or sequence.
For external numbers, enter the access code and then
the telephone number.
: Confirm.
program/service
Destinations?
Speed dialing?
Speed dialing features?
New entry?
Save?
To Next Page
Loading...
