Making Calls – Convenience Functions
45
Step by Step
Accept service menu-controlled second call
Precondition: You are on the phone. A second call is ac-
tivated. No "Accept call" or "Switch" key Æ page 45 is
programmed.
A second call is shown on the display with name / tele-
phone number and signalled through an alerting tone.
The caller hears the dial tone as if the telephone were
"idle".
> : Select and confirm. You are connected to the second
caller. The first caller waits.
End conversation with second party and resume con-
versation with first:
Press the key.
or
t n Replace the handset and lift it again.
Using the switchover button
The switchover button that must be configured by your
system administrator can be used for the following
functions:
• consultation (return to the call being held or the con-
ference being held)
• toggling
• accepting a waiting call
• accepting a group call
Waiting call
You hear a call-waiting tone. Information about the call
appears in the display.
Press the flashing key to accept the waiting call. The
lamp is on.
To g g l i n g
You are connected to two users. One user is waiting.
The switchover lamp is on.
Press the key to switch over to the other user. The first
user waits.
Answer camp-on?
Disconnect
Switchover
Switchover
To Next Page
Loading...
