Siemens Optipoint 420 - Saving a Function on a Key

Step by Step
Saving Functions and Appointments
74
Saving a function on a key
Press the key. The lamp lights up.
h Enter the service code.
or
> : Select and confirm.
and Press the programmable function key.
: Confirm.
Press the freely programmable function key.
The key allocation is displayed.
: Confirm.
> : Select and confirm one of the system functions prompt-
ed.
: Confirm.
program/service
Key function?
Switching levels in the optiPoint SLK module has
no effect on storing a function. Only one function
can be stored per key..
Change?
Change?
New function:
Save?
Keys that have been preprogrammed by the ser-
vice personnel cannot be changed. Then "Re-
turn?" is shown.
You can now activate the function directly by
pressing the key. For functions, such as call wait-
ing, that can be alternately activated/deactivated,
you activate the function when you press the key
and subsequently deactivate it when you press
the key again. The key’s lamp is lit when the func-
tion is active.