Step by Step
Making Calls – Convenience Functions
36
p Enter the station number of the telephone for which
you wish to (or have been requested to) pick up the call.
In this way you pick up the call.
Having the number of the called station displayed
If the number of the station for which you (as a member
of a call pickup group) wish to pick up a call does not ap-
pear on the display, you can enter the code for "Display
on request" after lifting the handset. If you are not sure
of this feature access code, ask the service personnel:
n Lift the handset.
After the code has been entered, the station number of
the telephone that has been called is displayed.
Taking a call in a hunt group
Calls are distributed to any idle member of a hunt group.
Your telephone rings.
n Lift the handset.
Incoming call on loudspeaker (speakercall
2-way)
A colleague addresses you directly over the speaker.
The speakerphone mode is automatically activated.
Answering via speakerphone is immediately possible.
or
n Lift the handset and reply.
Enter the code!
This function is not available with
optiPoint 420 economy.
You can address the colleague directly
Æ page 43.
Activating stop voice calling Æ page 80.
To Next Page
Loading...
