Step by Step
Making Calls – Basic Functions
28
Precondition: You have created a "Destination dial
number" Æ Seite 74.
Press key. The lamp lights up.
: Confirm.
> : Select and confirm.
poss. Has the destination dial number been created in the
optiPoint SLK module, the level shift key pressed seve-
ral times, in order to select the level (level 1... 4).
Press the desired destination dial key.
: Confirm.
Enter the number with pause (example)
p Enter the number
> : Select and confirm. A "P" appears in the display.
p Enter more numbers
or enter number with automatic call-back (Example)
> : Select and confirm. "RF" appears in the display
p Add destination call number
or lock the telephone with simultaneous transfer to
another destination (example)
qfd Enter telephone locking code e.g., *20
qhk Activate call transfer code e.g., *47
p enter destination call number
or just delete the existing number
> : Select and confirm. The number is deleted.
or if you have mistyped the entry:
> : Select, confirm and enter the sequence again.
program/service
Destinations?
Repdial?
Level 1
Change?
Enter Pause?
Enter Consult?
If you press this key when a call is in progress, a
call-back operation is executed immediately. The
first caller waits and the number of the stored
destination party is dialled.
In networked systems, the sequence must be
suffixed with r .
Delete?
Cancel?
To Next Page
Loading...
