Step by Step
Private Sphere/Security
82
or In the case of optiPoint 420 standard with Chip card
reader: Insert the chip card. All lamps light up briefly
Input is followed by the display: "Executed".
Remove the chip card again.
Enabling the telephone again:
Press the key. The lamp lights up.
jk Enter the service code.
or
> : Select and confirm.
> : Select and confirm.
and
p Enter the PIN (code number).
Input is followed by the display:
"Executed".
Insert
Chip card
Chip card
reader:
When the telephone is disabled in this way, a
special dial tone is audible when the handset is
lifted. Internally (within HiPath 4000), dialing is
possible in the usual way.
program/service
PIN / COS?
Change COS?
To Next Page
Loading...
