MAINTENANCE | 121
Part 4 MAINTENANCE
1. Enter the final end user data (EUNA)
For more information, please contact your local Siemens Precondition
At least access level 3 must be set to change the end user final destination data (EUNA).
Repair and Service Contract (RSC)
SINUMERIK offers an electronic logbook in which all of the activities relating to the Repair
and Service Contract (RSC) are saved.
After the service call has been completed, the control data are checked and are transferred
to the EUNA database for update.
1.1 This is how you generate the machine logbook
(1) Machine data
The following data are saved in the control in the "Machine logbook":
Contact data of the manufacturer (OEM)
Contact data of the dealer
Contact data of the end customer
Log of the service and diagnostic procedures that have already been carried out.
During a service call, the data should be checked as to whether it is correct.
(2) Open the “Machine identity” dialog box.
Procedure:
1) Select the "Diagnostics" operating area.
2) Press the "Version" soft key to open the "Version data" dialog box.
3) Press the "Details" soft key.
To Next Page
Loading...
