140 | Part 4
4.1 Acknowledging a maintenance task.
Acknowledge the message when a maintenance task has been completed.
Procedure.
(1) Select the "Diagnostics" operating area.
(2) Press the menu forward key and then the "Service planner" soft key.
The window with the list of all the maintenance tasks that have been set
up appears.
(3) Perform the maintenance task when the maintenance interval has
nearly expired or when prompted to do so by alarms or a warning.
(4) After you have performed a pending maintenance task and the task is
signaled as "Completed", position the cursor at the appropriate task
and press the "Servicing performed" soft key. A message is displayed
confirming the acknowledgment, and the maintenance interval is
restarted
To Next Page
Loading...
