OPERATION | 25
- Spindle select operation using manual operation switch.
- Turret rotation operation using manual operation switch.
- Auto door operation using manual operation switch.
- Quick setter Up/Down operation using manual operation switch.
- Tailstock operation using manual operation switch
- Steady Rest operation using manual operation switch.
However, some operation can be done regardless of selected mode. The operation is
possible if automatic operation isn't progressing. More detail explanation, refer to the
corresponding operation manual.
- Chuck clamp/unclamp operation using manual operation switch.
- Tailstock Quill advanced/Retract using manual operation switch.
If mode selection is completed correctly as below, current mode will be displayed on the
screen.
1. Operation Mode Change can be done only in machine ready status.
2. If emergency stop occurs in machine, mode switches to MDA mode. When machine
ready is operated, jog mode is selected automatically.
To Next Page
Loading...
