Siemens Reyrolle 7SR46 - Connectors and Terminal Blocks Specification

Connectors and Terminal Blocks Specification
[dw_7SR46-rearterminals, 1, en_US]
Figure 2-3 Rear Terminal View with Connectors
(1) Auxiliary power supply
(2) Binary inputs/binary outputs/pulse output/flag output/external trip input
(3) Protective grounding terminal
(4) Rear communication port
(5) Current inputs
Table 2-1 Terminal Blocks Specifications
Terminal Blocks Cable Type/Cable Specifications Manufacturer/Part Number Torque
Required
Current inputs Panduit ring terminal, nylon insulated M3
stud size, 4 mm
2
to 6.6 mm
2
, 12 AWG
TE Connectivity Mfr. Part No.
2-327960-1 or equivalent
0.58 Nm
Auxiliary power
supply
Insulated tin plated crimp pin connector,
2.6 mm
2
to 6.6 mm
2
, 12 AWG to 10 AWG
End sleeve
3D-8011H or equivalent
0.5 Nm to
0.6 Nm
Rear communica-
tion port
Pin type lug/1.5 mm
2
control cable
End sleeve
3D-8011H or equivalent
0.5 Nm to
0.6 Nm
Front communica-
tion port
USB, type B Tyco/974329-1 or equivalent -
Binary input/binary
output/pulse
output/remote flag
output/external
trip input
Insulated tin plated crimp pin connector,
2.6 mm
2
to 6.6 mm
2
, 12 AWG to 10 AWG
End sleeve
3D-8011H or equivalent
0.5 Nm to
0.6 Nm
Protective
Grounding
terminal
Panduit ring terminal, nylon insulated M3
stud size, 4 mm
2
to 6 mm
2
, 12 AWG to
10 AWG
RS Stock No. 613-9334 or
equivalent Mfr. Part no.
RVY5-3.2
0.58 Nm
2.5
Installing the Device
2.5 Connectors and Terminal Blocks Specification
Reyrolle, Operating, Manual 27
C53000-B7040-C103-1, Edition 10.2022