General
The fascia allows you to access all the push-buttons and to perform the setting changes and control actions.
By using the ▶ key, the fascia provides an option to reset the fault data display, latched binary output, and
LEDs. The front fascia contains a predefined LED list which provides the information about the LED indicators.
The operation of the relay is performed via the keypads.
[dw_7SR46_fascia, 1, en_US]
Figure 4-1 Front Fascia
Operating Concept
The operating concept allows you to do the following on-site operator control actions:
•
Navigation in the menu tree
•
View and modification of parameter setting values
•
Resetting saved information
•
Showing default displays, measured values and logs
•
Executing switching operations
•
Status display with LED
•
Function configuration
•
Configuring inputs, outputs and LEDs
•
CT configuration
•
Display device information such as firmware version
4.1
Using the Device Fascia
4.1 General
38 Reyrolle, Operating, Manual
C53000-B7040-C103-1, Edition 10.2022
To Next Page
Loading...
