Introduction
1
The RUGGEDCOM RX1400 is a multi-protocol intelligent node that combines Ethernet
switch, routing and firewall functionality with various wide area connectivity options.
The RUGGEDCOM RX1400 switch, with its rugged metal housing, is designed for DIN
rail, panel or rack mounting.
The RUGGEDCOM RX1400 provides a high level of immunity to electromagnetic in-
terference, heavy electrical surges, extreme temperature and humidity for reliable
operation in harsh environments.
The device has IP40 degree protection, does not use internal fans for cooling and
supports a -40 to 85 °C (-40 to 185 °F) extended temperature range. It is also certi-
fied for use in Class I, Division 2, Zone 2 hazardous locations.
Primary benefits include:
• Cost effective solution for large scale deployments
• Space-saving installation
• Reduced maintenance costs
• Customer data protection
• Support for additional applications
The RUGGEDCOM RX1400 is designed to support primary communications over pub-
lic mobile networks and leverage enhanced capabilities of mobile networks, while
making reliable and secure connections for mission critical applications in electric
utility substations, traffic control cabinets, railway applications, oil and gas and other
harsh environment applications.
NOTICE
To comply with FCC regulations, this device must only be used for mobile and fixed
applications.
1.1 Feature Highlights
Cellular Interface
• LTE: 700- B13, B17,
800/900/1800/2100/2600 MHz
• UMTS/HSPA+: 850/900/1900/2100
MHz
• Quad-Band EDGE/GPRS/GSM
• GNSS
WLAN Interface
• WLAN Access Point and Client:
WLAN Direct® (multi-channel, mul-
ti-role) dual band transceiver sup-
port of IEEE 802.11a/b/g/n for 2.4
GHz and 5 GHz
RUGGEDCOM RX1400
Installation Manual, 09/2019, C79000-G8976-1103-13
1
To Next Page
Loading...
Need help?
General
