Siemens RUGGEDCOM RX1400 User Manual

Communication Ports
4.2SFP Transceivers
Each port features an LED that indicates its link state.
State Description
Green (Solid) Link established
Green (Blinking) Activity
Off No link detected
The following are the pin-out descriptions for the RJ45 connectors:
8 1
Figure4.2 RJ45 Ethernet Port Pin Configuration
Pin 10/100Base-TX Description
1 RX+ Receive Data+
2 RX- Receive Data-
3 TX+ Transmit Data+
4 Reserved (Do Not Connect)
5 Reserved (Do Not Connect)
6 TX- Transmit Data-
7 Reserved (Do Not Connect)
8 Reserved (Do Not Connect)
4.2 SFP Transceivers
The RUGGEDCOM RX1400 features two Small Form-Factor Pluggable (SFP) transceiv-
er sockets, which are compatible with a wide array of SFP transceivers available from
Siemens.
LEDs
Each socket features an LED that indicates its link state.
State Description
Green (Solid) Link established
Green (Blinking) Activity
Off No link detected
Compatible SFP Transceivers
The following SFP transceivers are compatible with the RUGGEDCOM RX1400. For
more information, including installation/removal instructions and ordering infor-
30
RUGGEDCOM RX1400
Installation Manual, 09/2019, C79000-G8976-1103-13

Siemens RUGGEDCOM RX1400 Specifications

General

Brand	Siemens
Model	RUGGEDCOM RX1400
Category	Network Hardware
Language	English