Certification
6.1.11ICASA
6.1.11 ICASA
This device meets the requirements of the following standards established by the
Independent Communications Authority of South Africa and is certified for use in
South Africa:
• Electronic Communications Act 2005
6.1.12 ACMA
This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
• Radiocommunications (Compliance Labelling – Devices) Notice 2014 made un-
der Section 182 of the Radiocommunications Act 1992
• Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008
made under Section 182 of the Radiocommunications Act 1992
• Radiocommunications (Compliance Labelling – Electromagnetic Radiation) No-
tice 2003 made under Section 182 of the Radiocommunications Act 1992
• Telecommunications Labelling (Customer Equipment and Customer Cabling) No-
tice 2001 made under Section 407 of the Telecommunication Act 1997
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online Sup-
port at https://support.industry.siemens.com/cs/ww/en/view/109747499.
6.1.13 RoHS
This device is declared by Siemens AG to meet the requirements of the following Ro-
HS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Informa-
tion Products
A copy of the Material Declaration is available online at https://support.indus-
try.siemens.com/cs/ww/en/view/109738831.
RUGGEDCOM RX1400
Installation Manual, 09/2019, C79000-G8976-1103-13
53
To Next Page
Loading...
Need help?
General
