Certification
6
The RUGGEDCOM RX1400 device has been thoroughly tested to guarantee its confor-
mance with recognized standards and has received approval from recognized regula-
tory agencies.
6.1 Approvals
This section details the standards to which the RUGGEDCOM RX1400 complies.
6.1.1 CSA
This device meets the requirements of the following Canadian Standards Association
(CSA) standards under certificate 16.70029035:
• CAN/CSA-C22.2 No. 142-M1987
Process Control Equipment
• CAN/CSA-C22.2 No. 213-M1987
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Loca-
tions
• CAN/CSA-C22.2 No. 60079-0:11
Explosive Atmospheres – Part 0: Equipment – General Requirements
• CAN/CSA-C22.2 No. 60079-15:12
Electrical Apparatus for Explosive Gas Atmospheres – Part 15: Construction, Test
and Marking of Type of Protection N Electrical Apparatus
• UL 916, Edition 4.0 (2007)
Standard for Energy Management Equipment
• UL 60079-0, Edition 6.0 (2013)
Explosive Atmospheres – Part 0: Equipment – General Requirements
• UL 60079-15, Edition 4.0 (2013)
Explosive Atmospheres – Part 15: Equipment Protection by Type of Protection N
• ANSI/ISA-12.12.01-2013
Non-Incendive Electrical Equipment for Use in Class I and II, Division 2 and Class
III, Division 1 and 2 Hazardous (Classified) Locations
RUGGEDCOM RX1400
Installation Manual, 09/2019, C79000-G8976-1103-13
43
To Next Page
Loading...
Need help?
General
