Siemens S5-100U - Load Operation, for CPU 103 and Higher

STEP 5 Operations S5-100U
8.2.1 Load Operation, for CPU 103 and Higher
As with the basic load operations, the supplementary load operation copies information into the
accumulator. Table 8-10 explains the load operation. An example follows the table.
Table 8-10. Load Operation
Operation Meaning
Parameter
0 to 255
Operand
L Load
A word from the system data is loaded into ACCU 1 regardless of the
RLO.
ID
RS
STL ExplanationExample
In order to set parameters for
SINEC L1 bus operation via the
system data, the programmer and
slave numbers from SD57 should
be input into ACCU 1.
...
LRS57
...
Load ACCU 1 with the pro-
grammer and slave numbers.
8-40 EWA 4NEB 812 6120-02