Siemens S5-100U - Reference Guide for Setting Parameters in DB1

Integrated Blocks and Their Functions S5-100U
9.1.7 Reference Guide for Setting Parameters in DB1
1
If an argument such as seconds, for example, is not to be entered, input XX. The clock continues to run
with the updated data. The TIS parameter block does not acknowledge this argument..
2
If you input AM or PM after the clock time, the clock runs in the 12-hour mode. If you omit this
argument, the clock runs in the 24-hour mode. You must use the same time mode in the SET and TIS
parameter blocks.
wd =1 to 7 (weekday = Sun..Sat) p=– 400 to 400
dd =01 to 31 (day) v=0 to 126
mm =01 to 12 (month) x=2 to 255
yy =0 to 99 (year) y=0 to 255
hh =00 to 23 (hours) z=0 to 254
mn =00 to 59 (minutes) j/J=ja(yes)
ss =00 to 59 (seconds) y/Y=yes
hhhhhh =0 to 999999 (hours) n/N=no
Inputting the correction factor ( C orrection F actor)
Location of the clock data (
CL oc K Data)
Location of the status word (
ST atus W ord)
Updating the clock during STOP (
ST o P)
Saving the clock time after the last change from RUN
to STOP or Power OFF (
SAV e)
Enabling the operating hours counter
(
O peration H our counter E nable)
Setting the clock time and date
Setting the prompting time (
TI mer S et)
Setting the operating hours counter
(
O peration H our counter S et)
Parameter Argument Meaning
Block ID: SL1:
Slave number
Location of Send Mailbox
Location of Receive Mailbox
Location of Coordination Byte “Receive”
Location of Coordination Byte “Send”
Programmer bus number
SLN
SF
EF
KBE
KBS
PGN
p
DBx DWy
DBxDWy
MBy
MBy
p
p=1 to 3 x=2 to 255 y=0 to 255
SINEC L1 (SL1)
Block ID: TFB:
Intervals (ms) at which OB13 is called up and is
processed
OB13 p
p=0 to 655350 (State in 10-ms steps)
Timer-Funktions-Baustein (TFB)
Block ID:SDP:
Number of timers being processed( W atch- D og- T imer)WD p
p=1 to 2550
System-Dependent-Parameter (SDP)
Block ID: CLP:
CF
CLK
STW
STP
SAV
OHE
SET
TIS
OHS
p
DBxDWy,MWz,EWv
or AWv
DBxDWy,MWz,EWv
or AWv
J/Y/N
J/Y/N
J/Y/N
wd dd.mm.jj
hh:mn:ss
1
AM/PM
2
wd dd.mm.
hh:mn:ss
1
AM/PM
2
hhhhhh:mn:ss
1
ClockParameters (CP)
9-10 EWA 4NEB 812 6120-02