EasyManua.ls Logo

Siemens S5-135U/155U - Cpu 928 B; Technical Description

Siemens S5-135U/155U
560 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-42
System Manual
C79000-G8576-C199-06
5.4 CPU 928B
This section contains the hardware description and technical specifications of
the CPU 928B.
Details on programming the CPU 928B can be found in the CPU 928B
Programming Guide.
5.4.1 Technical Description
You can use the CPU 928B in single and multiprocessor operation in the
S5-135U/155U central controller (see Chapter 6). Up to four CPUs can be
used.
The CPU 928B is universally applicable, ensuring both very fast bit
processing and very fast word processing:
Cyclic
Time-controlled (9 different timebases)
Real-time controlled
Interrupt-driven (hardware interrupt)
Delayed (from Version 6ES5 928-3UB12)
The programming language is STEP 5.
The electronic circuitry of the CPU 928B is on two PCBs (basic and
expansion boards) in the double Eurocard format. Both PCBs are screwed
together, linked via connectors, and must not be separated. The basic board
provides the connection to the S5 bus via two backplane connectors.
The front plate width is 2 2/3 standard plug-in stations.
Application
Design
CPUs, Memor
y
Cards, Memor
y
Submodules, Interface Submodules

Table of Contents

Related product manuals