Siemens SENTRON 7KM PAC2200 - Page 73

Commissioning
6.3 Parameterizing the device
PAC2200
Equipment Manual, 12/2019, L1V30415167B-03
71
Selection
Range
Factory setting
SNTP
(with Ethernet
interface only)
Protocol is used for transmitting and synchronizing the time.

OFF:
The device interprets the current flow direction corre-
sponding to the wiring.

ACTIVE:
The device automatically requests the time from the NTP
server.

BCST client:
The device receives time frames
which are sent from an NTP server.
OFF
IP
(only when SNTP
is activated)
If an SNTP IP address is configured, only data from this IP
address is accepted.
0.0.0.0