Siemens SENTRON 7KT PAC1600 - Page 65

Description
3.5 Three-phase devices 5 A
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04
63
P14 Outputs (OUT1 and OUT2) only for devices with S0 interface/digital outputs
Note
This menu is divided into two sections for outputs OUT1 and OUT2.
Unit
Default
Range
P14.n.01
Output function
–
OFF
• OFF
• Wh+
• Wh−
• varh+
• varh−
•
VAh
P14.n.02
Channel number
1
1 … 4
P14.n.03
Normal status
OFF
• OFF
•
ON
P14.n.04
Delay "ON"
s
0.0
0.0 … 6000.0
P14.n.05
Delay "OFF"
0.0
P14.n.01
Output function:
•
OFF = Output deactivated.
•
ON = Output is always activated when the measuring device is switched on.
•
SEQ = Output activated in the event of phase sequence error.
•
LIM - ALA = Output activated in the event of upward violation of limit or
alarm.
•
PUL = Output used as pulse generator as per P11.
P14.n.03
Output of normal status. Permits inversion of activation logic.
P14.n.04
Delay setting for "ON".
P14.n.05
Delay setting for "OFF".