Technical specifications
12.1 Standards and approvals
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 09/2018, A5E42603425-AA
67
If you replace components, compliance with Class I, DIV. 2 can become invalid.
This device is only suitable for use in Class I, Div. 2, Group A, B, C, D, or in non-hazardous
areas.
The CPU 1515SP PC2 meets the requirements and safety objectives of the following
guidelines and complies with the harmonized European standards (EN) for programmable
logic controllers published in the official journals of the European Community:
● 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
● 2014/34/EU "Equipment and protective systems intended for use in potentially explosive
atmospheres" (Explosion Protection Directive)
● 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
● 2006/42/EC "Machinery Directive" for fail-safe modules
The conformity declaration certificates are available for the responsible authorities and are
kept at the following address:
Siemens AG
Digital Factory
Factory Automation
DF FA AS SYS
P.O. Box 1963
D-92209 Amberg, Germany
They are also available for download on the Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/
) web pages, keyword "Declaration of
Conformity".
Underwriters Laboratories Inc., complying with
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
To Next Page
Loading...
Need help?
General
