To Next Page

To Previous Page

Technical specifications

12.1 Standards and approvals

CPU 1515SP PC2 (F/T/TF)

Operating Instructions, 09/2018, A5E42603425-AA

ATEX approval

In accordance with EN 60079-15 (Electrical apparatus for potentially explosive atmospheres;

Type of protection "n") and EN 60079-0 (Electrical apparatus for potentially explosive gas

atmospheres - Part 0: General Requirements)

IECEx approval

According to IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type

of protection "n") and IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General

requirements)

RCM (C-Tick) Declaration of conformity for Australia/New Zealand

CPU 1515SP PC2 meets the requirements of the standard EN 61000-6-4:2007 + A1:2011.

Korea Certificate KCC-REM-S49-ET200SP

Note that this device corresponds to limit class A in terms of the emission of radio frequency

interference. This device can be used in all areas, except residential areas.

이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기

바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.

IEC 61131

The CPU 1515SP PC2 with the S7-1500 Software Controller CPU 1505SP (F/T/TF) fulfills

the requirements and criteria of the IEC 61131-2 standard (programmable logic controllers,

Part 2: Equipment requirements and tests).

PROFINET standard

CPU 1515SP PC2 is based on standard IEC 61158 Type 10.

PROFIBUS standard

CPU 1515SP PC2 is based on standard IEC 61158 Type 3.

Siemens SIMATIC CPU 1515SP PC2 F User Manual

Questions and Answers: