Siemens SIMATIC ET 200SP F-TM User Manual

Technical specifications
11.1 Technical specifications of the ET 200SP F-TM ServoDrive
F-TM ServoDrive
100 Equipment Manual, 02/2020, A5E47579503-AA
Article number
6BK1136-6AB00-0BU0
Dimensions
Width
20 mm
Height
73 mm
Depth
58 mm
Weights
Weight, approx.
55 g
Other
Braking chopper
Yes
Climatic and mechanical environmental conditions
You can find the climatic and mechanical ambient conditions here SIMATIC ET200SP
distributed I/O system (https://support.industry.siemens.com/cs/ww/en/view/58649293
).
If there are discrepancies between the statements in this document and the system manual,
the statements in the this document take priority.
Biological environmental conditions
The standards DIN EN IEC 60721-3-1:2018, DIN EN IEC 60721-3-2:2018, IEC 60721-3-3:
Edition 3.0, with the classes 1B1, 2B1 and 3B1 apply for the biological environmental
conditions during operation, long-term storage and transport.
Conductive dust and sand
The F-TM ServoDrive must not be exposed to conductive dust or sand during operation,
long-term storage and transport.
Chemical environmental conditions
The standards DIN EN IEC 60721-3-1:2018, DIN EN IEC 60721-3-2:2018, DIN EN 60721-3-
3:1995, with the classes 1C1, 2C1 and 3C1 apply for the chemical environmental conditions
during operation, long-term storage and transport.

Siemens SIMATIC ET 200SP F-TM Specifications

General

Brand	Siemens
Model	SIMATIC ET 200SP F-TM
Category	Servo Drives
Language	English