Siemens SIMATIC ET 200SP F-TM

Interrupts, error messages and diagnostics and system alarms
10.1 Status and error displays
F-TM ServoDrive
Equipment Manual, 02/2020, A5E47579503-AA
91
INC LED
Table 10- 9 Status and error display INC (encoder)
INC LED
Meaning
On
Incremental speed encoder was assigned parameters/activated
24..48V LED
Table 10- 10 24..48V status and error display
24..48V LED
Meaning
Off
DC link voltage outside the configured limits
On
DC link voltage within the configured limits (is OK)
flashes (0.5
Hz)
DC link voltage shortly before the interference threshold
PWR LEDs
Table 10- 11 PWR status and error display
PWR LED
Meaning
Off
Logic component supply of the converter is missing
On
Logic component supply of the converter is OK