Programming the Technological Functions
6-55
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0
Table 6-11 User data block (AW-DB), continued
AW-DB FM 353
Bit 0Bit 1Bit 2Bit 3Bit 4Bit 5Bit 6Bit 7Byte
Application data
DBD382 Application data 1 (data type: DINT)
DBD386 Application data 2 (data type: DINT)
DBD390 Application data 3 (data type: DINT)
DBD394 Application data 4 (data type: DINT)
Actual value block change
DBD398 Data type DINT
Service data
DBD402 Frequency output value (data type DINT)
DBD406 Pulse output counter (data type DINT)
DBD410 Reserved
DBD414 Reserved
DBD418 Difference between setpoint and actual position (data type DINT)
DBD422 Reserved
DBD426 Switch adjustment (data type DINT)
DBD430 Reserved
Additional production data
DBB434 Override
DBB435 NC traversing program no.
DBB436 NC block no.
DBB437 UP call counter
DBB438 Active G90/91
DBB439 Active G60/64
DBB440 Active G43/44
DBB441 Active D number
DBB442 Speed limit
DBB443
Accelera-
tion/decel-
eration
value lim-
ited
Frequency
value for
accelera-
tion limited
Start/stop
frequency
limited
DBB444
to
DBB445
Reserved
Parameter/data
DBB446 DB type (MD, incremental dimension or traversing program)
DBB447 Number
DBB448 Quantity
DBB449 Request
To Next Page
Loading...
