Siemens SIMATIC FM 353 - Page 338

Technical Specifications
A-4
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0
Digital inputs
Technical data for digital inputs:
Table A-4 Technical data: digital inputs
Number of inputs
5 (including controller ready)
Supply voltage 24 V DC
(allowable range: 20.4 − 28.8 V)
Electrical isolation No
Input voltage S 0 signal: −3 − 5 V
S 1 signal: 11 − 30 V
Input current S 0 signal: ≤ 2 mA
S 1 signal: 6 − 15 mA
Input delay (DE1 − 4) S 0 → 1 signal: type 15 µs
S 1 → 0 signal: type 150 µs
Connecting a 2-conductor sensor Possible
Digital outputs
Technical data for digital outputs:
Table A-5 Technical data: digital outputs
Number of outputs
4
Supply voltage 24 V DC
(allowable range: 20.4 − 28.8 V)
Electrical isolation No
Output voltage S 0 signal: Residual current max. 2 mA
S 1 signal: (Power supply −3 V)
Output current on signal “1”
S at ambient temperature of
40_C
− Rated value
− Permissible value range
− Lamp load
S at ambient temperature of
60_C
− Rated value
− Permissible value range
0.5 A (total current 2 A)
5 mA...0.6 A (over power supply range)
max. 5 W
0.1 A (total current 0.4 A)
5 mA...0.12 A (over power supply)
Output delay S 0 → 1 signal: type 300 µs
S 1 → 0 signal: type 300 µs
Short circuit Yes
Switching rate S Resistive load: max. 100 Hz
S Inductive load: max. 0.25 Hz
J