Configuring with the WBM
6.3 The menu items of the WBM
SIMATIC RF360R
Configuration Manual, 03/2022, C79000-G8976-C629-02
59
Error counter
The following error types are read and displayed:
Table 6- 19 Error types displayed in the "Error counter" area
This error counter is an indicator for a disturbed environment
Counter for protocol errors on the air interface for which the transponder
Counter for disruptions or collisions on the air interface that caused
communication to be disturbed.
Counter for failed signature encryptions of written blocks of data. Only
relevant for the transponder type "RF300".
CRC error counter
Counter for failed CRC checks
Error counter for interface problems of the internal interface
Counter for errors on the serial interface
Received signal strength [dB] for which amplitude modulation with the
transponder was detected.
Received signal strength [dB] for which phase modulation with the
transponder was detected.
The displayed error counter readings are counted from the last restart of the reader or the last
manual reset of the error counter readings.
To Next Page