Configuring with the WBM
6.3 The menu items of the WBM
SIMATIC RF360R
58 Configuration Manual, 03/2022, C79000-G8976-C629-02
This parameter has no relevance for RF360R (Fixed value: 0).
transponders
Maximum number of transponders to be expected that may be located in
the antenna field at the same time. Due to single tag mode, RF360R may
have a maximum of one transponder in the antenna field.
Set transponder type profile
The following values are possible:
Set presence check profile
Table 6- 18 Displayed parameters of the "Transponder status" area
Unique identifier of the transponder
Transponder type (vendor, identification)
Version of the transponder chip
Lock status of the OTP
area
Disabled blocks of the OTP area on the chip
Memory size of the user memory in bytes
Size of the memory blocks of the transponder chip
Number of memory blocks of the transponder chip
flux density
Radiant power that arrives at the transponder.
The lower the value, the more power the transponder receives.
Number of passive errors which occurred
Number of errors which occurred
Sum of the signature and CRC errors
Time in [ms] that the transponder spent in the antenna field.
To Next Page